Control panel
Instructions for use DAC basic/classic - DAC eco plus - OP4X00 - 00.0 - 04/2024 25
5.3.1 Adjusting the start bartack
The start bartack secures the seam at the seam beginning.
If a seam consists of backward stitches only, it is called a single
bartack. A seam made up of forward and backward stitches is
called a double bartack.
Single bartack
To adjust the single bartack:
1. perform a long press.
The interface Start Backtacking settings opens.
2. Use and to adjust stitches A and B and
the number of repeats n.
• n = 1 for single bartack
• n = 2 for double bartack
• n > 2 for multi-bartack
3. Press to return to the main screen.
The new values are adopted.
You can begin sewing; press the pedal forward to pedal
position +1.
To Next Page
Loading...
