About these instructions
Instructions for use DAC basic/classic - DAC eco plus - OP4X00 - 00.0 - 04/2024 5
References
Reference to another section in these instructions.
Safety Important warnings for the user of the machine are specifically
marked. Since safety is of particular importance, hazard symbols,
levels of danger and their signal words are described separately
in the chapter Safety
( p. 9).
Location
information
If no other clear location information is used in a figure, indications
of right or left are always from the user's point of view.
1.3 Other documents
The control includes components from other manufacturers.
Each manufacturer has performed a hazard assessment for these
purchased parts and confirmed their design compliance with
applicable
European and national regulations. The proper use
of the built-in components is described in the corresponding
manufacturer's
instructions.
1.4 Liability
All information and notes in these instructions have been compiled
in accordance with the latest technology and the applicable
standards and regulations.
Dürkopp Adler cannot be held liable for any damage resulting
from:
• Breakage and transport damages
• Failure to observe these instructions
• Improper use
• Unauthorized modifications to the control
• Use of untrained personnel
• Use of unapproved parts
To Next Page
Loading...
Need help?
General
