Control panel
Instructions for use DAC basic/classic - DAC eco plus - OP4X00 - 00.0 - 04/2024 21
5.2 Software operating modes
The software of the control panel offers various operating modes:
•Manual mode
Manual mode is the simplest operating mode. There are no
seam programs and no inputs for individual seam sections.
All programmable sewing parameters can be changed
manually during the sewing process.
• Automatic mode ( p. 32)
Automatic mode allows you to complete seam programs in
3
different modes:
• Label (4 segments)
• Pocket (6 segments)
• Custom programs P1-P15
All programmable sewing parameters can be set individually
for each segment.
To Next Page
Loading...
Need help?
General
