Dwyer Instruments UFM2 - Setup Menu

UFM2/UBT User Manual
Issue 1.1b July 20 Page 21
3.2 Setup Menu
Enter Pipe ID:
050.0 mm
Enter Pipe ID:
1.969 inches
Select Reading:
Flow | Vel
System Units:
impgal | USgal
Flow Units:
Usgal/m | USgal/h
Flow Units
gal/min | gal/h
Range 20 – 110mm
050.0 mm
Inches & 
Invalid
& 
mm & 
Invalid &

Valid & 
Valid & 
Vel &  (m/s)
m3 & 

Select & 

Select & 
Valid & 
Flow & 
USgal & 
Impgal & 
Vel & 
(ft/s)

Range 0.79 – 4.33
2.000 inches
Pipe Material:
M/Steel / Plastic /
Copper / S/Steel
Set Separation:
B 2
Instrument Fluid
Glycol|Water
Set Temperature:
HOT|COLD


 and User
installation setup


Select Dims:
mm | inches
Select Reading:
Flow | Vel
System Units:
litres | m3
Flow Units
m3/min | m3/h
Flow Units:
l/min | l/s
If “mm” is selected for the Select
Dimensions option, then the
temperatures will be displayed in
°C and the energy values will be
in kWh.