dynabook TECRA A40-J Series Maintenance Manual

Maintenance Manual (960-945) 4-22
Replacement Procedures
Figure 4-22 Removing the Fin
4.19.2 Installing the Fin
To install the Fin, follow the steps below and refer to Figure 4-22.
1. Set the Fin in place and secure it with the screws.
4.20 Click pad
4.20.1 Removing the Click pad
To remove the click pad, follow the steps below and refer to Figure 4-23 to
Figure 4-24.
Fin
1
2
3
S2 x 2.3CT
When removing the Fin, be sure to remove the screws in the reverse order
of the number marked on the Fin.
When installing the Fin, be sure to install the screws in the order of the
number marked on the Fin.

dynabook TECRA A40-J Series Specifications

General

Operating System	Windows 10 Pro
Battery Life	Up to 10 hours
Graphics	Intel Iris Xe Graphics
Bluetooth	Bluetooth 5.1
Processor	Intel Core i5-1135G7 or i7-1165G7
Display	14.0" FHD (1920 x 1080) Anti-Glare
RAM	8GB/16GB DDR4
Storage	256GB/512GB SSD
Wireless	Intel Wi-Fi 6 AX201
Ports	2 x USB 3.2 Type-A, 1 x USB 3.2 Type-C, HDMI, Ethernet, MicroSD card slot
Security	Fingerprint Reader, TPM 2.0
Webcam	HD Webcam