DYNACO USA 11 ● Installation inspection
Slimline Series RevB.doc THE SAFEST CHOICE 65
11 Installation inspection
11.1 Inspections of automatic doors.
• All automatic windows and doors must be inspected by a specialist at commissioning and after
that as required, but at least once a year. This inspection is not a maintenance service.
• Specialists are persons who, through training and experience, have acquired sufficient
knowledge regarding the installation to be inspected, and who are familiar with official guidelines,
the guidelines for prevention of accidents, and the generally accepted guidelines and technical
regulations. They are experts to the extent that they can evaluate the safety condition of the
installation to be inspected.
• It is expected from a specialist, that he or she provides objective advice regarding the safe
operation of the doors, independent of economic or internal circumstances in the company.
• A report of the inspection carried out must always be added. This can be done by filling in a
logbook or by providing a test protocol.
• It is recommended that the inspections be entrusted to the manufacturer, or that the
manufacturer at least be consulted.
• This provides the best guarantee for having the inspections carried out by a qualified and well
trained employee on the basis of a thorough knowledge of the construction and the regulations to
be complied with.
• For maintenance of the installation, it is recommended that a maintenance contract be arranged
with the manufacturer.
MANUFACTURER:
DYNACO USA, Inc.
3175 MacArthur Blvd
Northbrook, IL 60062
www.dynacodoor.us
Phone: 800-459-1930
Fax: 800-459-1960
To Previous Page
Loading...
Need help?
General