9CA 150 M150EN2
MAINTENANCE MEASURE
Item. in Measure See page Comments
fig. 1
23 Check the oil level in rear axle/planetary gearing17
14 Check the oil level in drum 17
32 Clean the radiators 18
20, 24 Inspect and tighten bolted joints 18 Applies only to new and
repaired components
15 Inspect rubber elements and bolted joints 18
26 Change engine oil and oil filter 19 See engine manual
30 Inspect the battery 19, 20
Every 250 operating hours (monthly)
Item. in Measure See page Comments
fig. 1
18 Change the hydraulic fluid filters 22
27 Drain condensate from fuel tank 23
5 Replace air cleaner main filter 23
8 Drain condensate from hydraulic tank 24
22 Change oil in rear axle differential 24
24 Change oil in rear axle planetary gears 24
Check diesel engine valve clearance See engine manual
3 Check belt tension for drive belt system See engine manual
Every 1000 operating hours (every six months)
Item. in Measure See page Comments
fig. 1
8, 9 Change fluid in hydraulic tank 25
12 Change oil in roller 25
10 Lubricate Forward/Reverse control 26
Every 2000 operating hours (every year)
Item. in Measure See page Comments
fig. 1
2 Replace fuel filter See engine manual
2 Clean the initial fuel filter 21
7 Check bleeder filter on hydraulic tank 22
Every 500 operating hours (every three months)
To Next Page
Loading...
Need help?
General
