Dynon SkyView SE - Page 93

Messages and Alerts
SkyView SE Pilot’s User Guide - Revision I 9-7
Spoken Alert
(if configured)
Message Displayed in
Message Window
Visual Alert
(severity)
Description
"Warning"
EGT # LOW
EGT indicator for identified sensor
has entered configured red low
range.
"Warning"
EMS # FAIL
The identified EMS module has
failed.
"Engine Monitor"
Visual indication varies
by configuration.
A system monitored by EMS and
configured as a general-purpose
input has entered the configured
red range.
"Fuel Flow"
FUEL FLOW HIGH
Fuel flow indicator has entered
configured red high range.
"Fuel Flow"
FUEL FLOW LOW
Fuel flow indicator has entered
configured red low range.
"Fuel Pressure"
FUEL PRES HIGH
Fuel pressure indicator has
entered configured red high
range.
"Fuel Pressure"
FUEL PRES LOW
Fuel pressure indicator has
entered configured red low range.
None
None
Near Top Bar:
Autopilot is engaged and vertical
acceleration has exceeded the
0.5G to 1.5G range.
"Fuel Quantity"
LEVEL HIGH
Fuel quantity indicator has
entered configured red high
range.
"Fuel Quantity"
LEVEL LOW
Fuel quantity indicator has
entered configured red low range.
"Oil Pressure"
OIL PRES HIGH
Oil pressure indicator has entered
configured red high range.
"Oil Pressure"
OIL PRES LOW
Oil pressure indicator has entered
configured red low range.
"Oil Temperature"
OIL TEMP
Oil temperature indicator has
entered configured red range.
None
None
On Top Bar:
An internal servo error has
occurred or ADAHRS data is
unreliable.
None
None
On Top Bar:
An internal servo error has
occurred or ADAHRS data is
unreliable.
"Engine Speed"
RPM HIGH
Tachometer indicator has entered
configured red high range.
"Engine Speed"
RPM LOW
Tachometer indicator has entered
configured red low range.