11
Emergency Release
Clutch
Reset Motor
BY
EA
G
LE
A
C
C
ESS C
O
N
TR
OL
S
YSTEM
S,
INC.
Emergency Release
Reset the Motor
Adjusting the Clutch
Unscrew bolt, remove top cap
and rotate easy release lever.
Depending on the weight of the gate, clutch
slippage may occur. Typical clutch slippage is
about 1/4 turn. If it does not slip, re-adjust the
clutch accordingly.
There is a red reset button on top of the 115 VAC motor. If the
motor ceases to function, TURN THE POWER OFF AND ALLOW
THE MOTOR TO COOL DOWN, then press the reset button.
These two
gaps should
remain even
for proper fit.
Diamond Board ONLY
To Next Page
Loading...
