EasyIO FW Series Connectivity Guide

EasyIO FW Series – Network Connectivity v2.0
28
IPv6 DNS
IPv6 DNS route address.
Wireless
Settings
Enable
Enable or disable the Wi-Fi network broadcasting.
SSID
Main SSID name. By default it is named as FW-xxxx where xxxx is the
last 4 digit of the MAC address.
User configurable.
Password
Password of main SSID , max 32 characters.
DHCP Settings
(IPv4)
DHCP Server
Check box to enable or disable the IPv4 DHCP server.
Be careful when enable it.
DHCP Start Address
Starting IPv4 DHCP address. Default is 100.
DHCP Limit
Total IPv4 DHCP Lease. Default is 100.
DNS server
DNS IP address
IPv4 DNS route address.
By default it is set to google.com DNS which is 8.8.8.8
Most of the time the Google DNS will work.
You might need to change it according to your own network DNS.
For example some routers require its connected device needs the
router IP address to be its DNS server IP in it.
Configuration Network
Configuration network is the secondary SSID network configurations.
** Remember to Save any changes and perform a Reboot for the new configurations to take effect**
Property
Description
Network Settings
IP address
IP address of FW secondary SSID
Subnet Mask
Subnet Mask of FW secondary SSID
DHCP server is always enable for secondary SSID.
This make it easy for installer to connect to this SSID without the need
to know the FW IP address range.
Wireless Settings
Hidden
Hide or unhide the Wi-Fi network broadcasting.
This property only applies to the secondary SSID.
By default it is hidden.
SSID
Main SSID name. By default it is named as Conf-xxxx where xxxx is the
last 4 digit of the MAC address.
User configurable.
Password
Password of secondary SSID

EasyIO FW Series Specifications

General

Brand	EasyIO
Model	FW Series
Category	Controller
Language	English