EasyIO FW Series Connectivity Guide

EasyIO FW Series – Network Connectivity v2.0
32
The below Diagram 02 shows that FW-01 is an Wi-Fi access point (AP) to 2 other FW, FW-02 and FW-03.
FW-01 is DHCP server.
FW-02 runs static IP.
FW-03 runs DHCP client and obtain its IP address from FW-01.
**Recommendation : For static IP address assignment please assign other than 100~199 range as this is
reserved for DHCP server**
Diagram 02

EasyIO FW Series Specifications

General

Brand	EasyIO
Model	FW Series
Category	Controller
Language	English