Eaton C441 Series - Page 42

PROFIBUS I/O Parameters
C441 PROFIBUS Module User Manual MN042002EN—July 2015 www.eaton.com 35
Output 1 Modbus Device Reset Register 0 = No Reset
1 = Soft Reset
2 = Factory Reset
3 = App parameter Reset
4 = reserved
5 = reserved
6 = Flush Fault History/Queue
7 = Reset Motor Starts
Input 1 S811 Device Product Code
Output 1 Motor Control Bit Description
0 = Run1
1 = Run2
2 = reserved
3 = Fault Reset
4 = reserved
5 = reserved
6 = reserved
7 = Ramp2 enable
Table 25. S811+ Available IO Data for Cyclic Polling, continued
IO Size (in bytes) Tag Description