Eaton Cutler-Hammer FP-5000 - System Alarms; Logging Settings; Contact Input CFG

Page 5-47
IL17569
Effective June, 2001
Table 5.13 System Alarms
Breaker Alarm Breaker Alarm Settings Default Setting
# of Operation: 9999
Isum INTR Amp: 50,000
Table 5.14 Logging Settings
Current Demand Current Demand Settings Default Setting
Interval (m): 15
Power Demand Power Demand Settings Default Setting
Window: Fixed
Interval (m): 15
Event Log Enable Event Log Enable Settings Default Setting
I Pickup: Yes
Data Logger Data Logger Settings Default Setting
Mode: Cont.
Trigger: Auto
Interval (s): 900
Value 1: Ia
Value 2: Ib
Value 3: Ic
Value 4: Ix
Value 5: Va
Value 6: Vb
Value 7: Vc
Value 8: Vx
Waveform Capture Waveform Capture Settings Default Setting
Records: 16x16
PreTrigger: 2
OSC Trigger TRIP2: Overwrite
OSC Trigger dV/dI: Disable
OSC Trigger Logic LG6: Overwrite
OSC Trigger Cntrl PB: Overwrite
OSC Trigger Comm: Overwrite
Table 5.15 Contact Input CFG
Contact Input Config Contact Input Config Settings Default Setting
Cin1: 52a
Cin2: 52b
Cin3: BFI
Cin4: Bkr Trouble
Cin5: Remote Open
Cin6: Remote Close
Cin7: Remote Reset
Cin8: user defined