Appendix VII i-on Range
Page 158
Secondary communications path
fault restored.
Zone on soak test failed.
Zone on soak test tampered.
The installer has loaded a different
version of the control unit's
operating software.
All speech dialler destinations
acknowledged calls.
Speech dialler destination did not
acknowledge call.
Speech dialler destination
acknowledged call.
Speech dialler made test call.
External radio siren n low battery
restored.
External radio siren n has a fault.
External radio siren n fault
restored.
External radio siren n jammed.
External radio siren n jamming
restored.
External radio siren n has low
battery.
Radio siren n supervision OK.
Radio n siren about to fail
supervision.
External radio siren n failed
supervision.
External radio siren n supervision
restored.
External radio siren n tampered.
External radio siren n tamper
restored.
Supervision failed for radio
detector at zone.
Supervision restored for radio
detector at zone.
Control unit 12V supply failed.
Control unit 12V supply restored.
Control unit has fault in main
processor.
The system restarted after a
power fail (mains and battery).
Tamper at keypad restored.
Tamper at expander restored.
Technical alarm on zone restored.
User nn changed their password.
User nn changed programming
configuration.
User nn deleted another User nn
from system.
Downloader session failed.
User nn keyed in a Duress code to
set the system (part setting
system).
User nn keyed in a Duress code to
unset the system (part setting
system).
User nn left Installer mode.
User nn logged out of Installer
Menu from web server.
User nn entered Installer mode.
User nn logged into Installer Menu
from web server.
User nn overrode set fail at
partition.
User nn overrode set fail at
partition.
User nn part set partition.
User nn has reset partition
User nn keyed in a Duress code to
unset partition n.
User nn keyed in a Duress code to
set partition n.
User nn started the exit process
for full set on partition n.
User nn started the exit process
for part set on partition n.
Downloader session completed
successfully.
User nn overrode set fail.
User changed speech dialler
telephone number.
User nn started the exit process
for full set on a part setting
system.
User nn changed time and/or date.
User nn omitted Hold Up Alarm
zone nn.
User nn inlcuded Hold Up Alarm
zone nn.
User nn included (restored) zone
nn.
WAM low battery restored.
WAM has low power supply.
WAM low power supply restored.
WAM about to fail supervision.
WAM has failed supervision.
WAM supervision restored.
The system was retored after a
user keyed in the wrong password
on the web browser interface more
than four times in a row.
Web server has caused a
tampered by a user trying to log
with the wrong password more
than four times.
Radio zone supervision OK.
Radio zone about to fail
supervision.
Smoke detector at zone has fault.