Eaton i-on Series - Remote Control Management

The Installer Menu i-on Range
Page 42
MENU Option
Factory Default
Notes
Only visible on i-on30EXD/i-
on50EXD or when suitable
communications module fitted.
IP Network (Own)
40 50 160
Web Server
Status
Disabled
Port number
80
VKP Instant
Disabled
Downloader
Port number 55132
IP Address
192.168.0.100
Sub-net mask
255.255.255.0
Gateway Address
Blank
GPRS
Only visible when suitable
communications module fitted
Ethernet
Only visible when suitable
communications module fitted
Downloading
Not available on i-on16.
Remote options visible on i-
on30EXD/i-on50EXD OR when
suitable communications module
fitted.
Account
Name
Blank
Serial Number
Blank
Connection Type
Remote
Rings to Answer
5 rings
Answer on one ring
Disabled
Access Mode
Call Out Only
This setting is required in order to
comply with EN50131.
Phone Book
Blank
IP Network
I
30 40 50 160
On i-on30 visible only when IP
module fitted.
IP Address 1
Blank
IP Port 1
Blank
IP Address 2
Blank
IP Port 2
Blank
Secure Callback
Disabled
Modem Baud Rate
Auto
Remote Servicing
(UK versions only. Must be
enabled by Eaton Security
Business External Support
Manager.)
Plug-by
Line Fail Response
Audible
For plug-by modules only.
Line Fail Delay
9 seconds
For plug-by modules only.
6 TEST
Sirens & Sounders
Wired Keypad
Radio Keypads
Expanders
30 50 160
Walk Test
Zone Resistances
30 40 50 160 Wired zones
only. (Present on i-on16 and i-on40