User Menu Options
Page 48
At the beginning of the warning time, the control unit
activates any outputs of type Autoset Warning.
At the end of the period, the control unit stops the
warning tone, sets the affected partition(s) without any
delay and deactivates any outputs of type Autoset
Warning.
Warning Tone Press or to choose between Audible or Silent.
When Silent, the control unit will NOT sound a warning
tone for the event (although the warning timer will still
operate).
If a warning tone is due from more than one event at the
same time, and any of the tones is set to "Audible", the
tone will be audible.
Edit Event
Use System Config – Calendar Set – Edit Event to edit individual parts of
an event.
Delete Event
Use System Config – Calendar Set – Delete Event to delete an event.
Add Exception
Use System Config – Calendar Set – Add Exception to create an
exception. During the time specified by the exception, none of the events
that have the exception will take place. When you add an exception, the
control unit guides you through the following steps:
Name Enter up to 12 characters or press to leave the
default name. See page 27 for details of how to enter
text.
Exception Start Time Specify the time you want the exception to start, then
to display the next prompt.
The time “00:00” is midnight, at the beginning of a
new day.
Exception Start Date Specify the date you want the exception to start (for
example, 31/12 for 31
st
December).
Exception End Time Specify the time you want the exception to end.
Exception End Date Specify the date you want the exception to end.
To Next Page
Loading...
Need help?
General
