Eaton Power Xpert 9395P - Figure 50. Distributed Bypass System CAN and Pull-Chain Simplified Interface Wiring; Figure 51. Distributed Bypass System UPS CAN Wiring Without Mobs

Eaton Power Xpert 9395 UPS Installation and Operation Manual 164201764—Rev 14 95
Figure 50. Distributed Bypass System CAN and Pull-Chain Simplified Interface Wiring
UPS 1 UPS 2 UPS 3 UPS 4
CAN
(If Installed)
(If Installed)
Pull Chain
NOTE This drawing is for distributed bypass wiring purposes and is not a floor layout plan. UPSs can be placed in any physical order.
Figure 51. Distributed Bypass System UPS CAN Wiring without MOBs
Shielded Twisted Pair
Shielded Twisted Pair
Shielded Twisted Pair
UPS 1
CAN Bridge Card J3
UPS 2
CAN B ridge Card J3
UPS 3
CAN Bridge Card J3
(If Installed)
UPS 4
CAN Bridge Card J3
(If Installed)
NOTE External CAN connections between UPSs require shielded twisted-pair wire.
Installing Options and Accessories