180 Eaton Power Xpert 9395 UPS Installation and Operation Manual 164201764—Rev 14
Figure 88. Parts of the Touch Screen
A The UPS status area automatically displays the Eaton model number, current time and date, active alarms, active notices, and
load percent and battery run time for the UPS. If the Eaton Environmental Monitoring Probe is installed, the temperature and
humidity sensed by the probe will also be displayed. The small head symbol between the system model and time allows the
operator select a different language from an imbedded list.
The top line of the display blinks while scrolling when the system needs attention. Some notices and alarms may be
accompanied by an audible horn. To silence the horn, touch anywhere on the control panel once. For more information about
alarms and notices, see paragraph 7.6.12 User Log.
B
The information area contains data about UPS status and operations.
C After touching the padlock in the upper right corner, the numerical keypad appears to allow entry of the system access pass
code for operation. See Table 35 Security Levels and Functions.
UPS Operating Instructions
To Next Page
Loading...
