Eaton Power Xpert 9395P - Figure 82. Main Menu and MIMIC Screen (Online Mode)

Eaton Power Xpert 9395 UPS Installation and Operation Manual 164201764—Rev 14 137
Table 30. Display Function Menu Map
Menu Option Description
EVENTS Displays the list of Active System Events and a historical log of system events.
METERS Displays performance meters for the system or critical load.
CONTROLS Displays the System Status screen.
SETUP Allows you to set the display contrast, set the date and time for the time stamp, configure the UPS serial
communication ports, and view the firmware version numbers.
LOAD OFF De-energizes the critical load and powers down the UPS.
ESC Returns to Main Menu and Mimic screen from the Events, Meters, Controls, or Setup screens. Returns to
the main System Setup Level screen from a setup submenu.
UPS OPERATING INSTRUCTIONS
EATON 9395 UPS (650–825 kVA) Installation and Operation Manual S 164201725 Rev 4P Draft 31-Jan-2010
7-6
7.2.4 Using the Menu
The UPS menu bar allows you to dis play data in the i nformation area to help you
monitor and control UPS operation. Table 7-2 shows the basic menu structure.
Table 7-2. Display Function Menu Map
Menu Option Description
EVENTS Displays the list of Active System Events and a historical log of system events.
METERS Displays performance meters for the system or critical load.
CONTROLS Displays the System Status screen.
SETUP Allows you to set the display contrast, set the date and time for the time stamp,
configure the UPS serial communication ports, and view the firmware version numbers.
LOAD OFF De-energizes the critical load and powers down the UPS.
ESC Returns to Main Menu and Mimic screen from the Events, Meters, Controls, or Setup
screens. Returns to the main System Setup Level screen from a setup submenu.
Return arrow acknowledges or executes a command, or saves a setting.
Up and down arrows scroll through screens and lists or highlight settings.
Left and right arrows select or adjust settings displayed on the screen.
7.2.5 Mimic Screen
Figure 7-5 shows the Main Menu and Mimic screen. To select the Mimic screen from
the Events, Meters, Controls, or Setup screens, press the
ESC pushbutton on the
current menu bar.
The Mimic screen shows the internal components of the UPS cabinet and a real-time
graphical representation of the operating status of the system.
TIME: 11 : 35 : 43 DATE: 02 / 25 / 2004
CONTROLS LOAD OFF
METERSEVENTS SETUP
OUTPUT
BATT
UPS
INPUT
STS
W
BYP ASS
Figure 7-5. Main Menu and Mimic Screen (Normal Mode)
Return arrow acknowledges or executes a command, or saves a setting.
UPS OPERATING INSTRUCTIONS
EATON 9395 UPS (650–825 kVA) Installation and Operation Manual S 164201725 Rev 4P Draft 31-Jan-2010
7-6
7.2.4 Using the Menu
The UPS menu bar allows you to dis play data in the i nformation area to help you
monitor and control UPS operation. Table 7-2 shows the basic menu structure.
Table 7-2. Display Function Menu Map
Menu Option Description
EVENTS Displays the list of Active System Events and a historical log of system events.
METERS Displays performance meters for the system or critical load.
CONTROLS Displays the System Status screen.
SETUP Allows you to set the display contrast, set the date and time for the time stamp,
configure the UPS serial communication ports, and view the firmware version numbers.
LOAD OFF De-energizes the critical load and powers down the UPS.
ESC Returns to Main Menu and Mimic screen from the Events, Meters, Controls, or Setup
screens. Returns to the main System Setup Level screen from a setup submenu.
Return arrow acknowledges or executes a command, or saves a setting.
Up and down arrows scroll through screens and lists or highlight settings.
Left and right arrows select or adjust settings displayed on the screen.
7.2.5 Mimic Screen
Figure 7-5 shows the Main Menu and Mimic screen. To select the Mimic screen from
the Events, Meters, Controls, or Setup screens, press the
ESC pushbutton on the
current menu bar.
The Mimic screen shows the internal components of the UPS cabinet and a real-time
graphical representation of the operating status of the system.
TIME: 11 : 35 : 43 DATE: 02 / 25 / 2004
CONTROLS LOAD OFF
METERSEVENTS SETUP
OUTPUT
BATT
UPS
INPUT
STS
W
BYP ASS
Figure 7-5. Main Menu and Mimic Screen (Normal Mode)
Up and down arrows scroll through screens and lists or highlight settings.
UPS OPERATING INSTRUCTIONS
EATON 9395 UPS (650–825 kVA) Installation and Operation Manual S 164201725 Rev 4P Draft 31-Jan-2010
7-6
7.2.4 Using the Menu
The UPS menu bar allows you to dis play data in the i nformation area to help you
monitor and control UPS operation. Table 7-2 shows the basic menu structure.
Table 7-2. Display Function Menu Map
Menu Option Description
EVENTS Displays the list of Active System Events and a historical log of system events.
METERS Displays performance meters for the system or critical load.
CONTROLS Displays the System Status screen.
SETUP Allows you to set the display contrast, set the date and time for the time stamp,
configure the UPS serial communication ports, and view the firmware version numbers.
LOAD OFF De-energizes the critical load and powers down the UPS.
ESC Returns to Main Menu and Mimic screen from the Events, Meters, Controls, or Setup
screens. Returns to the main System Setup Level screen from a setup submenu.
Return arrow acknowledges or executes a command, or saves a setting.
Up and down arrows scroll through screens and lists or highlight settings.
Left and right arrows select or adjust settings displayed on the screen.
7.2.5 Mimic Screen
Figure 7-5 shows the Main Menu and Mimic screen. To select the Mimic screen from
the Events, Meters, Controls, or Setup screens, press the
ESC pushbutton on the
current menu bar.
The Mimic screen shows the internal components of the UPS cabinet and a real-time
graphical representation of the operating status of the system.
TIME: 11 : 35 : 43 DATE: 02 / 25 / 2004
CONTROLS LOAD OFF
METERSEVENTS SETUP
OUTPUT
BATT
UPS
INPUT
STS
W
BYP ASS
Figure 7-5. Main Menu and Mimic Screen (Normal Mode)
Left and right arrows select or adjust settings displayed on the screen.
77..22..55 MMiimmiicc SSccrreeeenn
Figure 82 shows the Main Menu and Mimic screen. To select the Mimic screen from the Events, Meters,
Controls, or Setup screens, press the ESC pushbutton on the current menu bar.
The Mimic screen shows the internal components of the UPS cabinet and a real–time graphical representation
of the operating status of the system.
Figure 82. Main Menu and Mimic Screen (Online Mode)
TIME: 11 : 35 : 43 DATE: 12 / 11 / 2008
CONTROL
S
LOAD OFF
METERS PUTESSTNEVE
OUTPUT
BATT
UPS
INPUT
STSW
BYPASS
77..22..66 DDiissppllaayy MMeennuu OOppeerraattiioonn
Table 31describes the menu functions and how to use them.
UPS Operating Instructions