2 Eaton Power Xpert 9395 UPS Installation and Operation Manual 164201764—Rev 14
Figure 1. Figure 1-1Power Xpert 9395 Four UPM UPS (1000–1100 kVA)
UPM SECTION
FI-UPM
ISBM or IOM SECTION
Older LCD Pushbutton
Control Panel
11..11 UUPPSS SSttaannddaarrdd FFeeaattuurreess
The UPS has many standard features that provide cost–effective and consistently reliable power protection.
The descriptions in this section provide a brief overview of the UPS standard features.
11..11..11 IInnssttaallllaattiioonn FFeeaattuurreess
Each UPS section is shipped separately. The sections are mechanically and electrically joined at the installation
site, and can be permanently bolted to the floor. Power wiring can be routed through the top or bottom of the
cabinet with connections made to easily accessible terminals. Control wiring is routed through the top of the
cabinet and must be installed in accordance with Class 1 wiring methods.
11..11..22 CCoonnttrrooll PPaanneell
The control panel, located on the front of the UPS, contains a liquid crystal display (LCD) or color touchscreen
and pushbutton switches to control the operation of the UPS and to display the status of the UPS system. See
Chapter 7 UPS Operating Instructions for additional information.
Introduction
To Next Page
Loading...
