Eaton S801+ Series User Manual

S801+ Soft Starter
S801+ Soft Starter MN03900002E—November 2012 www.eaton.com ix
CAUTION
In the AUTO Reset mode, CAUTION must be exercised to
assure that any restart occurs in a safe manner.
WARNING
Make sure you read and understand the procedures in
this manual before you attempt to set up or operate the
equipment.
WARNING
Do not work on energized equipment unless absolutely
required. If the troubleshooting procedure requires
equipment to be energized, all work must be performed
by properly qualified personnel, following appropriate
safety practices and precautionary measures.

Eaton S801+ Series Specifications

General

Product Series	S801+
Category	Controller
Input Voltage	24 VDC
Output Voltage	24 VDC
Number of Inputs	8
Protection Class	IP20
Communication Protocol	Modbus