Eaton S801+ Series User Manual

S801+ Soft Starter
S801+ Soft Starter MN03900002E—November 2012 www.eaton.com vii
List of Tables, continued
Appendix A—Parameters
Soft Start Config—S801+ …N3S Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Protections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Fault Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Appendix B—Overload Protection
Overload—Adjustment Range—Inline Connected . . . . . . . . . . . . . . . . . . . . . . . . . 38
Motor FLA Potentiometer Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Thermal Motor Overload Times . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Appendix C—Ratings, Cooling and Power Losses—Inline
Standard Duty—15 Second Ramp, 300%
Current Limit at 40°C—Inline Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Severe Duty—30 Second Ramp and/or 450%
Current Limit at 50°C—Inline Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Maximum Power Loss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Appendix E—Troubleshooting
S801+ Fault Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Eaton S801+ Series Specifications

General

Product Series	S801+
Category	Controller
Input Voltage	24 VDC
Output Voltage	24 VDC
Number of Inputs	8
Protection Class	IP20
Communication Protocol	Modbus