ECD SmartDRY SD Series - Page 119

SD Series Dry Cabinets Setup and Operation Manual | A62-3337-00 Rev: 1.0.0 Page 113
Setup:
1. Connect the ECD SmartDRY™ Cabinet to the Network via cable. The Cabinet acquires an IP Address
from the Network. This will then be the URL Address for the SmartDRY™ Network.
2. Get SmartDRY™ IP address assigned by your Network.
a. From the ECD SmartDRY™ Control Panel:
i. Select Menu > Other Settings.
ii. Scroll down to the Network Menu and Press OK.
iii. Log and use the assigned IP address as the web address for your web browser to access
SmartDRY™ Network. For example: http://10.1.1.999.
Viewing initial SmartDRY™ data:
1. On initial load of your SmartDRY™ Network using your SmartDRY™ IP address, you’ll be able to view
current state of your SmartDRY™ Cabinet.
a. Graph:
i. Display RH, Temperature, Door Activity Graph.
b. Real Time Status
i. RH, Temperature, Door Activity.
ii. Color Indicators: (Red, Yellow, Green, White)
iii. Events:
1. Door Open
iv. ECD SmartDRY™ Status and Settings:
1. SmartDRY™
2. SmartBAKE™
v. Alarms
vi. Fan and Desiccant Indicators