ECD SmartDRY SD Series - Page 3

Declaration of Conformity
Electronic Controls Design, Inc.
4287-B S.E. International Way
Milwaukie, Oregon U.S.A. 97222-8825
(503) 659-6100 / (800) 323-4548
FAX: (503) 659-4422
Declaration of Conformity
Product:
ECD SmartDRY™ 3D-10 & 3D-10SB
Part Number:
E62-3310-30/35
E62-3310-60/65
ECD SmartDRY™ 3D-30 & 3D-30XD
E62-3330-30/35
E62-3339-30/35
The undersigned hereby declares, on behalf of the ECD Inc., that the above-referenced product, to which this
declaration relates, is in conformity with the provisions of:
SAFTEY:
IEC 61010-1 “Safety requirements for electrical equipment for measurement, control, and laboratory use -
Part 1: General requirements”
EMISSIONS:
EN 61000-3-2:2014 “Electromagnetic Compatibility (EMC) - Limits For Harmonic Current Emissions …”
EN 61000-3-3:2013 “Electromagnetic Compatibility (EMC) - Limitation of voltage changes, voltage fluctua-
tions and flicker …”
EN 61000-6-4:2007+A1:2011 Class A “Electromagnetic compatibility (EMC) - Emission standard for industrial
environments”
FCC 15.107:2015 Class A “Conducted Limits”
FCC 15.109(g):2015 Class A “Radiated emission limits”
ICES-003:2012 Class A “Information Technology Equipment (ITE) – Limits”
IMMUNITY:
EN 61000-6-1:2007 “Electromagnetic Compatibility (EMC). Immunity for residential, commercial and light-
industrial environments”
The Technical Construction File required by this Directive is maintained at the corporate headquarters of ECD, Inc.
Name:
Paul Austen
Position:
Senior Project Engineer
Signature:
Date:
August, 2015