Echo shindaiwa CS-501SX - Assembling Starter

STARTER SYSTEM
CS-501SX, CS-501SXH
501sx
10
2. Carefully install rewind spring and case (B) on
starter case (C) as one piece. Match ear (b) and
with ear (c1) on starter case.
3. Assemble rope reel (D) engaging hook (d) with
hook (a) of rewind spring.
NOTE:
Apply lithium based grease, ECHO XTend-
ed Protection Lubricant or Red Armor Lubricant on
around startet shaft (c2) of starter case (C) if dry.
4. Check for proper engagement of rewind spring
and rope reel by turning rope reel (D) clockwise
and counterclockwise.
B
A
a
d
D
D
C
B
b
c1
2-3 Assembling starter
1. If rewind spring (A) is removed from spring case
(B), rewind inside case as shown.
c2