Echo shindaiwa CS-501SX - Disassembling Chain Brake

CHAIN BRAKE SYSTEM
CS-501SX, CS-501SXH
501sx
41
6-1 Disassembling chain brake
WARNING DANGER
Wear eye protection and safety gloves when
disassembling or assembling chain brake to
protect eye and hand from injury.
1. Move brake lever (A) to chain brake engaging
position.
2. Remove sprocket guard (B).
3. Remove screw (C) and two bolts (D) to remove
sprocket guard plate (E) and spike (F).
4. Remove three bolts (G) and brake cover (H).
5. Inspect all the brake parts for damage. Replace
them as required.
6. Remove brake lever (Refer to “7-2 Inspecting
auto-oiler assembly and oil line”).
7. Inspect the brake lever for damage. Replace it
as required.
A
B
D
F
E
C
H
G
A