REAR HANDLE AND CONTROL SYSTEM
CS-501SX, CS-501SXH
501sx
69
9-3-3 Replacing rear handle heater (continued)
10. Insert the tab (e) of rear handle cover (E) into
rear handle, and install rear handle cover (E) on
rear handle, while pushing the rear handle cover (E)
as shown.
11. Insert the tab (d) of handle grip (D) into rear
handle, and install handle grip (D) as shown.
12. Reinstall disassembled parts.
E
D
9-3-4 Replacing heater switch
1. Remove air cleaner cover and air fi lter.
2. Remove carburetor and carburetor elbow.
3. Disconnect heater switch coupler (A) and re-
move heater switch.
4. Install new heater switch (B) as shown.
5. Connect heater switch coupler (A).
6. Reinstall disassembled parts.
A
B
e
E
D
d
To Next Page
Loading...
