Alarm delay if the minimum temperature is not reached
Starting point: ‘Settings’ screen (13)
Ä
Chapter 7.1 ‘Initial start-up’ on page 43
1.
Select ‘Alarm Settings
’
(60) and confirm with .
2.
Press until the ‘Alarm Delay if Minimum T
emperature Is Not Reached Screen’ (63)
appears.
3.
Set the delay in seconds using , and .
4.
Confirm the settings with .
ð
The alarm delay for if the detergent concentration is too high and the minimum
temperature is not met has been set.
Installation and start-up
56MAN049432 Rev. 03-03.2024
To Next Page
Loading...
