Alarm delay for high detergent concentration
Starting point: ‘Settings’ screen (13)
Ä
Chapter 7.1 ‘Initial start-up’ on page 43
1.
Select ‘Alarm Settings
’
(60) and confirm with .
2.
Press until the ‘Alarm Delay for High Detergent Concentration
’ screen (62)
appears.
3.
Set the delay in seconds using , and .
4.
Confirm the settings with .
ð
Alarm delay for high detergent concentration is set.
Installation and start-up
55 MAN049432 Rev. 03-03.2024
To Next Page
