ECP2010 / ECP2010H
65 / 68
Outlet check valve for ECP2010 / ECP2010H
(conic root of thread for connecting capillary; ceramic seat, without frit and
spring)
(further possibilities – ACA70100 sapphire seat without frit and spring, and
other – contact sales department)
Inlet check valve for ECP2010 / ECP2010H
(flat root of thread for connecting tubing; ceramic seat, without frit and spring)
(further possibilities - ACA 71100 sapphire seat without frit and spring
pružinky)
Piston with holder
(piston diameter 1/8“)
Piston with holder and mounting
(piston diameter 1/8“)
O – ring ID 4,47 mm, cross section 1,78 mm, Kalrez
®
Needle of degassing/purging valve, PEEK
Single sided timing belt 9.5 mm wide, 122 teeth
Motor BLCD
(when ordering, note unit serial number and pump type)
Deska DELTA OPT – osazená
(when ordering, note unit serial number and pump type)
Deska Dita + Ervin + Grace-P
(when ordering, note unit serial number and pump type)
Crossed serial cable 9pin RS 232
(2x DB9 female, length approx. 2 m)