39
2
Hardware Installation
RJ45 LAN
2.5.6 RJ45 Fast-Ethernet Port
The system board is equipped with an onboard RJ45 fast-
ethernet LAN port at location CN8 of the system board. It al-
lows the system board to connect to a local area network by
means of a network hub.
BIOS Setting
Enable or disable the onboard LAN in the Integrated Peripherals
submenu (“Onboard Device” section) of the BIOS. Refer to
chapter 3 for more information.
Driver Installation
Install the “LAN Drivers” contained in the provided CD into
your system. Refer to chapter 4 for more information.
W
To Next Page
Loading...
