90
3
BIOS Setup
3.1.6 PnP/PCI Configurations
This section describes configuring the PCI bus system. It covers
some very technical items and it is strongly recommended that
only experienced users should make any changes to the default
settings.
3.1.6.1 Reset Configuration Data
Enabled The BIOS will reset the Extended System Configura-
tion Data (ESCD) once automatically. It will then rec-
reate a new set of configuration data.
Disabled The BIOS will not reset the configuration data.
3.1.6.2 Resources Controlled By
The Award Plug and Play BIOS has the capability to automatically
configure all of the boot and Plug and Play compatible devices.
Auto(ESCD) The system will automatically detect the settings
for you.
Manual Choose the specific IRQ in the “IRQ Resources”
field.
The settings on the screen are for reference only. Your version may not be identical
to this one.
To Next Page
Loading...
