EasyManuals Logo
Home>ECS>Motherboard>865PE-A

ECS 865PE-A User Manual

ECS 865PE-A
131 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
1
Introduction
7
1.1 Features and Specifications
1.1.1 Features
Chipset
Intel
®
865PE chipset
- Intel
®
865PE Memory Controller Hub (MCH)
- Intel
®
82801EB I/O Controller Hub (ICH5)
Processor
The system board is equipped with Socket 478 for installing one of
the following supported processors.
Intel
®
Pentium
®
4 (Prescott and Northwood) processor up to
3.06GHz
- Intel Hyper-Threading Technology
- FSB: 533MHz and 800MHz
Intel
®
Celeron
®
processor
- 400MHz system data bus
System Memory
Supports four 184-pin DDR DIMM sockets
Supports dual channel (128-bit wide) memory interface
- Each channel supports 2 DIMM sockets
Supports up to 4GB system memory
Synchronous operation with processor system bus
- PC2100/PC2700/PC3200 (DDR266/DDR333/DDR400)
with 800MHz FSB CPU. DDR333 will run at 320MHz
memory frequency when used with 800MHz FSB CPU.
- Use PC2100/PC2700 (DDR266/DDR333) with 533MHz
FSB CPU
- Use PC2100 (DDR266) with 400MHz FSB CPU
Supports non-ECC (x64) DIMM using 128Mb, 256Mb or
512Mb
Supports unbuffered DIMMs
Chapter 1 - Introduction

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ECS 865PE-A and is the answer not in the manual?

ECS 865PE-A Specifications

General IconGeneral
BrandECS
Model865PE-A
CategoryMotherboard
LanguageEnglish

Related product manuals