116
4
Supported Software
4.2.5 Hardware Monitor
The system board comes with the Hardware Monitor utility con-
tained in the provided CD. This utility is capable of monitoring
the system’s “health” conditions and allows you to manually set a
range (Highest and Lowest Limit) to the items being monitored.
If the settings/values are over or under the set range, a warning
message will pop-up. The utility can also be configured so that a
beeping alarm will sound whenever an error occurs. We recom-
mend that you use the “Default Setting” which is the ideal setting
that would keep the system in good working condition.
To install, please follow the steps below.
1. On the left side of the autorun screen, click the “TOOLS”
icon.
2. Click “Hardware Monitor” on the main menu. The following
screen will appear.
3. Follow the prompts on the screen to complete installation.
4. Reboot the system for the driver to take effect.
To Next Page
Loading...
Need help?
General
