67
3
BIOS Setup
3.1.2.3 Hyper-Threading Technology (for Intel
®
Pentium
®
4 Processor
with Hyper-Threading Technology only)
This field is used to enable the functionality of the Intel
®
Pentium
®
4 Processor with Hyper-Threading Technology and will
appear only when using this processor.
3.1.2.4 Quick Power On Self Test
This field speeds up Power On Self Test (POST) whenever the
system is powered on. The BIOS will shorten or skip some check
items during POST. To attain the shortest POST time, select “Ena-
bled”.
3.1.2.5 Hard Disk Boot Priority
This field is used to select the boot sequence of the hard drives.
Move the cursor to this field then press <Enter>. Use the Up or
Down arrow keys to select a device then press <+> to move it
up or <-> to move it down the list.
3.1.2.6 USB Flash Disk Type
HDD Emulates the USB flash disk to HDD mode.
Floppy Emulates the USB flash disk to floppy mode.
3.1.2.7 First Boot Device, Second Boot Device, Third Boot Device
and Boot Other Device
Select the drive to boot first, second and third in the “First Boot
Device” “Second Boot Device” and “Third Boot Device” fields
respectively. The BIOS will boot the operating system according
to the sequence of the drive selected. Set “Boot Other Device”
to Enabled if you wish to boot from another device.
To Next Page
Loading...
Need help?
General
