79
3
BIOS Setup
3.1.4.2 Onboard Device
Move the cursor to this field and press <Enter>. The following
screen will appear.
USB Controller
Enabled Enables the onboard USB. You can further configure
the onboard USB in the “USB 2.0 Controller” and
“USB Keyboard Support” fields.
Disabled Disables the onboard USB.
USB 2.0 Controller
If you are using USB 2.0, this field must be set to Enabled.
USB Keyboard Support
If you are using a USB keyboard under DOS, set this field to
Enabled.
AC97 Audio
Auto Select this option when using the onboard audio
codec.
Disabled Select this option when using a PCI sound card.
The settings on the screen are for reference only. Your version may not be identical
to this one.
To Next Page
Loading...
Need help?
General
