Cadence II Fetal Monitor Service Manual
－ 55 －
CAUTION :
① Although the monitor is chemically resistant to most common hospital cleaners and
non-caustic detergents, different cleaners are not recommended and may stain the
monitor.
② Many cleaners must be diluted before use. Follow the manufacturer’s directions
carefully to avoid damaging the monitor.
③ Don’t use strong solvent, for example, acetone.
④ Never use an abrasive such as steel wool or metal polish.
⑤ Do not allow any liquid to enter the product, and do not immerse any parts of the
monitor into any liquids.
⑥ Avoid pouring liquids on the monitor while cleaning.
⑦ Don’t remain any cleaning solution on the surface of the monitor.
6.2.1 Cleaner
The following cleaning solutions are recommended for monitor and accessories:
Soft Soap Tensides Ethylate Acetaldehyde
Monitor √ √ √ √
Ultrasound Transducer √ √ √ √
TOCO Transducer √ √ √ √
Belt √ √ √ √
Remote Marker √ √ √ √
Intrauterine Pressure Cable
√ √ √ √
Fetal ECG Cable √ √ √ √
Notes:
① The monitor surface can be cleaned with hospital-grade ethanol and dried in air or
with crisp and clean cloth.
② EDAN has no responsibility for the effectiveness of controlling infectious disease
using these chemical agents. Please contact infectious disease experts in your
hospital for details.
6.3 Care and Cleaning of Transducer
Gel must be wiped from the ultrasound transducer after use. These precautions will
prolong the life of the transducer.
To Next Page
Loading...