What to do if EDAN INSTRUMENTS CADENCE II Measuring Instruments has lower heart beat or no sound?
If your EDAN INSTRUMENTS Measuring Instruments exhibits a lower heart beat or no sound, it could be due to a mainboard failure, transducer failure, or loudspeaker failure. Consider changing the mainboard, transducer, or loudspeaker.
What to do if EDAN INSTRUMENTS CADENCE II Measuring Instruments power on, the power is normal but no display, or improper flashes?
If your EDAN INSTRUMENTS Measuring Instruments is powered on but the display is absent or flashing improperly, there are several potential causes: * The LCD itself might be damaged, requiring replacement. * There could be a bad connection to the LCD, necessitating repair or replacement of the connection wire. * The mainboard could be damaged, requiring replacement. * The interface board might be damaged, also requiring replacement.
What to do if EDAN INSTRUMENTS CADENCE II Measuring Instruments has faculative down?
If your EDAN INSTRUMENTS Measuring Instruments experiences intermittent shutdowns, it could stem from several factors. Strong interference from electrified wire netting might be the cause, suggesting a check of the power supply and earth system. Alternatively, it could be due to bad power supply or mainboard performance, indicating the need to change the power supply or mainboard, respectively. A faulty connection between the power supply, mainboard, or display could also be the culprit, pointing to the need to change or repair the connector.
Why EDAN INSTRUMENTS Measuring Instruments network does not work?
If the network function of your EDAN INSTRUMENTS Measuring Instruments is not working, this could be due to a network failure or a mainboard failure. You should check and repair the network cable. If the issue persists, consider changing the mainboard.
What to do if EDAN INSTRUMENTS CADENCE II button is disabled?
If a button on your EDAN INSTRUMENTS Measuring Instruments is disabled, it might be due to a damaged keyboard, requiring a keyboard replacement. Alternatively, the keyboard connection might have a failure, suggesting the need to change or repair the keyboard wire.
What to do if EDAN INSTRUMENTS Measuring Instruments fuse burns when power on?
If the fuse in your EDAN INSTRUMENTS Measuring Instruments burns out immediately upon powering on, it suggests a short circuit within the power supply or other components. To resolve this, remove a part load and check again to isolate the issue.
What to do if a certain operation or measurement function of EDAN INSTRUMENTS Measuring Instruments is invalid?
If a specific operation or measurement function is not working on your EDAN INSTRUMENTS Measuring Instruments, it indicates that the mainboard or relevant part is damaged. Check the mainboard and the relevant part.
Why EDAN INSTRUMENTS CADENCE II power indicator is on, but the fan doesn’t run, the measurement isn’t normal?
If the power indicator is lit but the fan isn't running and the measurements are abnormal on your EDAN INSTRUMENTS Measuring Instruments, it suggests that the +12Vd.c. supply is damaged. Change the power supply.
What to do if EDAN INSTRUMENTS Measuring Instruments has abnormal TOCO display?
If your EDAN INSTRUMENTS Measuring Instruments shows an abnormal TOCO display, it could be due to a bad connection of the transducer, suggesting a transducer replacement. The display might also have a failure, refer to display failure solution. If the issue persists, the mainboard may have a failure, requiring a mainboard replacement.
What to do if EDAN INSTRUMENTS CADENCE II has hoarse sound or no sound?
If your EDAN INSTRUMENTS Measuring Instruments is producing a hoarse sound or no sound at all, it could be due to a mainboard failure, requiring a mainboard replacement. Alternatively, the loudspeaker or its wiring might have a failure, suggesting a change of the loudspeaker or cable.
General| Brand | EDAN INSTRUMENTS |
|---|---|
| Model | CADENCE II |
| Category | Measuring Instruments |
| Language | English |
Provides an overview of the CADENCE II Fetal Monitor and its connectivity features.
Details safety, size, weight, environment, and power supply specifications for the fetal monitor.
Explains how the fetal monitor works, including ultrasound and TOCO measurement principles.
Describes the basic components and structure of the CADENCE II monitor.
Details the power module specifications and pin definitions for power input and output jacks.
Explains the mainboard's functions, interface definitions, and pin assignments for various connectors.
Describes the fetal monitor board's functions and pin definitions for its connectors.
Details the specifications and pin definitions for the print control board's interface.
Explains the interface board's role in communication and its pin definitions for connected components.
Covers initial checks for appearance, packing, power-on status, and component connections.
Guides on checking the monitor's surface and accessories for damage or completeness.
Details the procedure for connecting power and performing initial checks after turning the monitor on.
Explains the functions of various buttons and indicators on the monitor's front panel.
Describes the meaning of different indicator lights and their status during operation.
Explains how to use the recorder, print patterns, and troubleshoot printing issues.
Details how to connect the monitor to a network for data transmission.
Guides on connecting the monitor to a PC for data analysis using specialized software.
Provides instructions and diagrams for installing the power supply board.
Details the steps and connections required for installing the main board.
Guides on installing the fetal monitor board and its connections to other components.
Explains the procedure for installing or replacing the monitor's battery.
Provides instructions for installing the print control board.
Details the process of installing the interface board and its connections.
Lists common issues with the monitor, recorder, or networking, and their solutions.
Describes steps for inspecting the monitor and accessories before packing.
Outlines essential checks and environmental considerations before powering on the device.
Details the procedure for powering on the fetal monitor safely.
Provides important reminders regarding labels, user familiarity, and potential misuse.
Explains the procedure for obtaining Fetal Heart Rate (FHR) using ultrasound.
Details the process of monitoring FHR using a fetal ECG electrode, including contraindications.
Describes simultaneous monitoring of twins using different channels.
Explains methods for monitoring uterine contractions, both external (TOCO) and internal (IUPC).
Guides on using the remote marker to record fetal movement events.
Outlines the steps to follow after completing patient monitoring.
Details visual, routine, and mechanical inspections to ensure proper functioning and safety.
Provides instructions for cleaning the monitor casing and display screen.
Explains how to clean TOCO and Ultrasound transducers, and Fetal ECG cables.
Guides on cleaning the recorder platen, thermal print head, and paper sensing mechanism.
Provides instructions for washing soiled belts.
Details recommended sterilant choices for various monitor components.
Lists recommended disinfection agents and procedures for the monitor and accessories.
Provides guidelines for storing recorder paper to maintain its quality and readability.
To Next Page