Cadence II Fetal Monitor Service Manual
－ 53 －
WARNING : The cable test function is not meant to check the accuracy of the
system, only to confirm cable function.
CAUTION : Since procedures vary according to hospital needs/ preferences,
it is the responsibility of the hospital staff to determine exact
policies and procedures for both monitoring and
amnioinfusion. The safe and effective use of the Saflex™ IUPC
is dependent on the skill of the clinician who applies /use it.
CAUTION : Read Directions For Use of Disposable Saflex™ IUPC prior to
insertion. The Product has been sterilized by gamma radiation
and is sterilized and non-pyrogenic unless package is broken or
open. Do not re-sterilize.
5.5 Remote Patient Marker Recording of Fetal Movement
Insert the marker cable of fetal movement into its socket. When FHR is monitored, the
mother takes the event maker in her hand. She operates the hand-held remote marker
press-switch when sensing fetal movement. At the moment, the symbol “↑” of fetal
movement will be shown at the display screen and printed on the record paper.
5.6 After Monitoring
Operation after Monitoring
① Remove transducers, electrodes, etc. from patient. Wipe transducer with a soft cloth
to remove remaining ultrasound coupling gel.
② Tear the paper at the folding place.
③ Switch off the power of the monitor.
To Next Page
Loading...
Need help?
General