EDAN INSTRUMENTS CADENCE II User Manual

Cadence II Fetal Monitor Service Manual
－ 56 －
Although transducers are designed for durability, they should be handled with care.
Rough handling could damage the cover, piezoelectric crystals and mechanical
movement. The cover is made of a soft plastic, and contact with hard or sharp objects
should be avoided. Do not excessively flex the cables.
WARNING : Under no circumstance are transducers to be used to monitor patients
under water.
CAUTION :
① Be sure that the cleaning solutions and transducers do not exceed a temperature of
45℃.
② Do not autoclave the transducers and cables or heat them above 70℃.
6.3.1 Cleaning of TOCO Transducer
To clean a TOCO transducer:
① Wipe the transducer with a cloth.
② Clean the transducer with a cloth soaked in a solution of soap and water, or a
cleaning solution. Do not immerse the transducer in the solution. Use only the
following cleaning solutions:
Z BURATON LIQUID
Z MIKROZID
Z ETHANOL 70%
Z SPORACIDIN
Z CIDEX
When using a cleaning solution, follow the manufacturer’s directions carefully to
avoid damaging the transducer.
③ Wipe the transducer with a cloth damped with water.
④ Wipe the transducer with a clean, dry cloth to remove any remaining moisture.
6.3.2 Cleaning of Ultrasound Transducer
To clean an ultrasound transducer:

EDAN INSTRUMENTS CADENCE II Specifications

General

Brand	EDAN INSTRUMENTS
Model	CADENCE II
Category	Measuring Instruments
Language	English