SE-12 Series Electrocardiograph User Manual Introduction
- 14 -
Chapter 2 Introduction
SE-12 series electrocardiograph gathers ECG signals of 12 leads simultaneously. It displays the
operation menu, ECG parameters as well as electrocardiograms.
The 12-channel ECG waves can be viewed on the LCD screen and printed out by using a
high-quality thermal recorder. The sampled ECG data can be saved, transmitted and exported.
The manual, auto, rhythm, R-R analysis or VCG (only configurable for SE-12 Express, SE-1200
Express, and SE-1201) mode can be chosen freely.
For SE-12 Express, the exercise ECG function is configurable. When a patient with coronary
heart disease runs, the added heart load will cause myocardium hypotension, and then the ECG
will change abnormally. Therefore, the exercise ECG function of SE-12 Express can be used to
diagnose concealed coronary heart disease and atypical angina pectoris, prescribe the workload
for patients with myocardial infarction before they leave hospital, and assess the effect of the
treatment.
SE-12 series electrocardiograph can be powered by the mains supply or battery.
Configuration: main unit, power cord, patient cable, chest electrodes, limb electrodes, disposable
electrodes, clip/snap/banana socket adaptors, thermal recorder paper, fuses, battery.
NOTE:
1 The pictures and windows in this manual are for reference only.
2 This manual takes pictures and interfaces of SE-12 Express as an example, and they
may look slightly different from your model.
2.1 Top Panel
Figure 2-1 SE-12 Express
To Next Page
Loading...
