EDAN SE-12 Express - Chapter 12 Error Messages

SE-12 Series Electrocardiograph User Manual Error Messages
- 75 -
Chapter 12 Error Messages
Hint information and the corresponding causes provided by the electrocardiograph are listed in
Table 12-1.
Table 12-1 Error Messages and Causes for Resting ECG
Message
Cause
Lead off
Electrodes fall off the patient or the patient cable falls off the unit, or
a high polarization voltage occurs.
Battery Weak
The battery is weak.
No Paper
Recorder paper runs out or is not loaded.
Testing
The ECG data is being sampled periodically.
Paper Error
When Paper Marker is set to Yes, the electrocardiograph advances
the recorder paper to the next black marker. If it advances the paper
for 300mm and cannot find the next black marker, the hint Paper
Error is displayed.
Testing
The ECG data is being sampled periodically.
Sampling/Analyzing/Recor
ding
ECG signals are being sampled / analyzed / recorded.
Learning
The self-study process of arrhythmia arithmetic in the Trigger
Sample mode
Detecting
The examining process of arrhythmia data in the Trigger Sample
mode
Transmitting
ECG data is being transmitted from the electrocardiograph to the
PC through the net or serial cable in the auto or rhythm mode.
Transmitting fails
Data fails to be transmitted through Ethernet or WIFI.
Loading Order…
Orders are being loaded to the electrocardiograph.
Memory Full
There is no space for saving more records.
Module Error
There is something wrong with the signal sample module.
DEMO
The system is in the demonstration mode.
Overload
The direct current offset voltage on an electrode is too high.