EDAN SE-12 Express - Basic Setup

SE-12 Series Electrocardiograph User Manual System Setup
- 55 -
10.5.1 Setup (without WIFI Module)
Item
Description
Device No.
Input the maximum of 30 letters or numbers.
Transmit After Saving
Choose from: On or Off. This setting is only available in the SE-12
Express.
Select On, the electrocardiograph sends ECG data right after it saves a
PDF report.
Auto Transmission
Choose from: On or Off.
Select On, the electrocardiograph automatically sends ECG data after the
printing of ECG report is performed on the main screen.
Select Off, the electrocardiograph will not send the ECG data in the same
situation.
Transmission Mode
Choose from: Net Port or UART (Ymodem).
FTP User Name and
Password
Input the maximum of 20 characters. EDANDAT by default.
The user name and password are used to authenticate FTP transmission.
Only when they are correct, the transmission via FTP is allowed.
FTP Path
Set the path as the next level directory of file storage on the FTP server.
FTP Port
Input the maximum of 3 characters.
Server IP
Set server IP in the format of XXX.XXX.XXX.XXX. XXX is a number
from 0 through 255.
Local IP
Set server IP in the format of XXX.XXX.XXX.XXX. XXX is a number
from 0 through 255.
Gateway
Set gateway in the format of XXX.XXX.XXX.XXX. XXX is a number from
0 through 255.