EDAN SE-12 Express - Attaching the Reusable Electrodes (for Resting ECG); Attaching the Disposable Electrodes

SE-12 Series Electrocardiograph User Manual Operation Preparations
- 30 -
IEC
AHA
Electrode Placement
R / L
RA / LA
Below the right/left clavicle
N / F
RL / LL
Below the right/left rib
3.3.3 Attaching the Reusable Electrodes (for Resting ECG)
Limb Electrode
Chest Electrode
1) Ensure that the electrodes are clean;
2) Clean the electrode area which is a short distance above the ankle or the wrist with 75%
alcohol;
3) Daub the electrode area on the limb with gel evenly;
4) Place a small amount of gel on the metal part of the limb electrode clamp or on the brim
of the chest electrode's metal cup;
5) Attach the electrodes in place.
When connecting the chest electrodes, place the electrode on the chest electrode site and
squeeze the suction bulb. Unclench it and the electrode is adsorbed on the chest;
NOTE: Long-time measurement with a strong negative pressure on the suction bulb
may cause reddening of the skin. When using the electrode on kids or patients
with delicate skin, squeeze the suction bulb lightly.
3.3.4 Attaching the Disposable Electrodes
Reed
Connecting to a Lead Wire
Clamp
Suction Bulb
Connecting to a Lead Wire
Metal Cup