SE-12 Series Electrocardiograph User Manual Printing ECG Reports
- 41 -
Chapter 6 Printing ECG Reports
The operation procedure is as follows:
Manually switch lead group
MANU
mode
Configure printing and system
parameters if necessary
Select a work mode
Press PRINT/STOP to start
sampling
Press PRINT/STOP to stop
sampling
NOTE:
1. The working mode cannot be changed during the printing course. Stop printing
reports before changing the working mode.
2. Within three seconds after returning to the main screen, if you press the PRINT/STOP
key to print an ECG report in the auto quick mode or the manual mode, the recorder
will not respond.
3. If Print Out is set to Off in the Record Info Setup1 window, the ECG report can be
saved and transmitted, but cannot be printed out by pressing the PRINT/STOP key in
the auto and rhythm modes.
4. Please consult with physician or medical professional regarding diagnosis produced
by VCG test if you have any questions or concerns about your results.
To Next Page
Loading...
