Chapter 8
| Authentication Commands
AAA
– 215 –
aaa accounting
commands
This command enables the accounting of Exec mode commands. Use the
no
form
to disable the accounting service.
Syntax
aaa accounting
commands
level {
default
| method-name}
start-stop group
{
tacacs+
| server-group}
no aaa accounting
commands
level {
default
| method-name}
level - The privilege level for executing commands. (Range: 0-15)
default
- Specifies the default accounting method for service requests.
method-name - Specifies an accounting method for service requests.
(Range: 1-64 characters)
start-stop
- Records accounting from starting point and stopping point.
group
- Specifies the server group to use.
tacacs+
- Specifies all TACACS+ hosts configured with the tacacs-server
host command.
server-group - Specifies the name of a server group configured with the
aaa group server command. (Range: 1-64 characters)
Default Setting
Accounting is not enabled
No servers are specified
Command Mode
Global Configuration
Command Usage
◆
The accounting of Exec mode commands is only supported by TACACS+
servers.
◆
Note that the
default
and method-name fields are only used to describe the
accounting method(s) configured on the specified TACACS+ server, and do not
actually send any information to the server about the methods to use.
Example
Console(config)#aaa accounting commands 15 default start-stop group tacacs+
Console(config)#
To Next Page
Loading...
Need help?
General
