Edge-Core ECS2100-10P - Show Ip Igmp Snooping

Chapter 23 | Multicast Filtering Commands
IGMP Snooping
– 564 –
show ip igmp
snooping
This command shows the IGMP snooping, proxy, and query configuration settings.
Syntax
show ip igmp snooping [ vlan vlan-id]
vlan-id - VLAN ID (1-4094)
Command Mode
Privileged Exec
Command Usage
This command displays global and VLAN-specific IGMP configuration settings.
Example
The following shows the current IGMP snooping configuration:
Console#show ip igmp snooping
IGMP Snooping : Enabled
Router Port Expire Time : 300 s
Router Alert Check : Disabled
Router Port Mode : Forward
TCN Flood : Disabled
TCN Query Solicit : Disabled
Unregistered Data Flood : Disabled
802.1p Forwarding Priority : Disabled
Unsolicited Report Interval : 400 s
Version Exclusive : Disabled
Version : 2
Proxy Reporting : Disabled
Querier : Disabled
VLAN 1:
--------
IGMP Snooping : Enabled
IGMP Snooping Running Status : Inactive
Version : Using global Version (2)
Version Exclusive : Using global status (Disabled)
Immediate Leave : Disabled
Last Member Query Interval : 10 (unit: 1/10s)
Last Member Query Count : 2
General Query Suppression : Disabled
Query Interval : 125
Query Response Interval : 100 (unit: 1/10s)
Proxy Query Address : 0.0.0.0
Proxy Reporting : Using global status (Disabled)
Multicast Router Discovery : Disabled
VLAN Static Group Port
---- --------------- --------
1 224.1.1.1 Eth 1/ 1
.
.
.