Edge-Core ECS2100-10P - Description

Chapter 22 | Quality of Service Commands
– 535 –
Example
This example creates a class map call “rd-class,” and sets it to match packets marked
for DSCP service value 3:
Console(config)#class-map rd-class
Console(config-cmap)#match cos 3
Console(config-cmap)#
Related Commands
show class-map (541)
description This command specifies the description of a class map or policy map.
Syntax
description string
string - Description of the class map or policy map. (Range: 1-64 characters)
Command Mode
Class Map Configuration
Policy Map Configuration
Example
Console(config)#class-map rd-class#1
Console(config-cmap)#description “matches packets marked for DSCP service
value 3”
Console(config-cmap)#