210E / 210ECL / 2010 / 2010ECL / 2018ECL SERIES SIGNAL MONITOR
OPERATIONS MANUAL
Eberle Design Inc. Page 20
Red Fail Enabled by SSM = DISABLED
Dual Indication Fault Timing = 350-500 ms
WDT Error Clear on PU = DISABLED
Minimum Flash = ENABLED
Config Change Fault = ENABLED
Red Cable Fault = DISABLED
AC Line Brownout = 98 +/- 2 Vrms
Pin EE Polarity = NORMAL
Flashing Yellow Arrows = <none>
*> Configuration Check Value = 7633 (0x1DD1)
To Next Page
Loading...
