27
8 Web Connection and Setup
You can use the Web browser to connect the camera for viewing or setting. Open the web browser and enter the IP
Address of the camera to establish a connection. The default IP Address of the camera is “192.168.2.3”.
When the welcome screen appears, enter the “Admin Name” and “Password”. The default values are:
Admin Name: “admin” & Password: “1234”
When the camera is connected, the browser will take you to the live video page. If you are viewing this camera at first time,
the following dialog will appear to install the ActiveX plug in. Please check the publisher part, you should only accept it if it
is published by Edimax Technology CO.,LTD..
After installed the ActiveX plug-in, the video image will be shown up in the web screen directly.
To Next Page
Loading...
